王中王精选六肖中特

Service Hotline: 18053469992
180-5346-9992

> 常见问题 > Your current location : 王中王精选六肖中特 > FAQ >

How to repair the leakage of FRP fire water tank?

Release Date: June 28, 2019Keyword: FRP fire water tank

How to repair the leakage of FRP fire water tank?
① Repair FRP fire water tank with adhesive
1. Wash the cracks of the water tank with a cleaning agent to remove dirt, rust, and oil stains on the cracks. Remove the grooves in the cracks and rinse the cracks with the cleaning agent multiple times until it is clean and free of debris.
2. Use two pieces of broken glass fiber cloth without oil stain and slightly larger than the groove surface, apply a layer of adhesive, and then stick it to the two sides of the crack, and then apply a layer of adhesive after 10-15 minutes, naturally at room temperature It is ready for use after curing for 25 hours.
3. It can be glued with xh-ⅱ type adhesive. First extrude the components a and b in equal amounts, and then repeatedly with the agricultural machinery adhesive No. i (the amount is about 1/3 of the above adhesive).
②: Repair the crack of FRP water tank with adhesive fusion method
1. Put the water in the water tank clean and dry, and drill a 3mm hole at each end of the crack. If the crack is curved or long, you can drill another hole at the corner or in the middle and scrape the crack with a broken saw blade.
2. Drop the adhesive on the crack, and then tap with the hammer on the crack to make the adhesive penetrate the crack. Add the adhesive and tap it every half an hour, repeat 2 to 4 times, until the glue can't fuse, then place 3 Hours-5 hours to use.
3. Use 502 glue water droplets in the two holes, and use 3 mm aluminum rivets to rivet and close the cracks.