王中王精选六肖中特

Service Hotline: 18053469992
180-5346-9992

List of products in the current section:

> 常见问题 > Your current location : 王中王精选六肖中特 > FAQ >

FRP fire water tank price calculation method

Release Date: July 01, 2019Keyword: FRP Water Tank
FRP fire water tank price calculation method
FRP fire water tank price calculation method (case analysis): In general, when calculating the price of FRP fire water tank, we routinely use the calculation method of the price per unit volume multiplied by the volume of the water tank. In fact, this calculation method is not very scientific or inaccurate. Two water tanks which are also 24 cubic meters in size, one of which is B x L x H = 4mx3mx2m and the other is B x L x H = 6mx2mx2 m. Assuming that the two water tanks are priced at 20,000 yuan, the price seems to be the same. In fact, because the surface area of the first water tank is 52 square meters, the unit price is 384.62 yuan, while the surface area of the second water tank is 56 square meters, the unit price is 357.14 yuan. The most important factor in determining the cost of a water tank is the amount of board used.
In summary, when calculating the price of FRP fire water tanks, the surface area should be taken as the basis (in addition, the thickness of the panel should be considered), so that the calculation can be accurately performed.
Precautions for using FRP fire water tank:
1. Wodi glass fiber reinforced plastic water tank is designed and manufactured for storage of drinking water at room temperature. Please do not store hot water and other liquids (if you need to store hot water, please specify before ordering.)
2. On-site construction: Before construction, please install braces according to the basic requirements. Provide construction power, electric welding machine and clean water for inspection and sealing.
3. Prevent pollutants from flowing into the water tank from the outside: for the convenience and safety of maintenance inspection, there must be a certain space around the water tank.
4. FRP molded veneer should not touch sharp corners, and do not hit with hard things such as tools.
5. To prevent expansion, contraction, partial load and shock resistance of the pipe.
FRP water tankFRP water tank
FRP water tank